Physical Compatibility:
Each ABR800 arrives with our universal camera mounting bracket, designed to accommodate most popular professional and semi-pro cameras with its wide range of adjustments. With the adjustable camera platform, you can attach your camera to the bracket and slide it in and out of the ringflash center hole to find the position that best suits your specific camera. Side to side adjustments can be made along the platform as well to center your camera lens while the bracket itself adjusts up and down along the ringflash mounting post to accommodate large camera bodies and battery packs, supporting cameras with a 1 to 4.75-inch distance from lens center to camera base. The ringflash center chamber accommodates camera lenses measuring up to 4 inches in diameter.

Synchronization:
Our 12-inch sync cord arrives with each unit, so that you may connect the ringflash to your camera. This sync cord has a 1/8-inch miniplug on one end to connect on the back panel of your ringflash, with a PC-connection on the other end to connect to your camera. With the sync cord, your ringflash will only take its cue to fire from you when your shutter is pressed.

If your camera does not have a PC outlet, the sync cord can be connected through your hot shoe with a hot shoe adaptor or our CyberSync Remote Control System may be used.

>> Click Here to learn more about the CyberSync Remote Control System
>> Click Here to learn more about the HSA Hot Shoe Adaptor