Back to List

LINK Flash Unit

$895.95

SKU: LINK800

Qty:

Eligible for FREE Shipping for orders over $300!

Email a Friend

Overview

The LINK Flash Unit features HSS and TTL flash capabilities, a built-in receiver, an 800W equivalent daylight balanced modeling light (great for video and continuous work), and an optional detachable battery with over 250 full power flashes on a single charge. The HSS and TTL capabilities will be controlled by the HUB remote (initially available for Nikon and Canon, Sony and others to follow). The battery and the charger are sold separately. The charger is able to charge two batteries consecutively.

FEATURED PRODUCT IN PROFESSIONAL PHOTOGRAPHER'S 'HOT ONES' 2021!

LINK Flash Unit FAQs

Perfect for: Professional photographers in any field looking for versatility both inside and outside the studio.

FEATURES: 9 f-stop power variability (3.1 Ws to 800 Ws); Adjustable in precise 1/10 f-stops; All-digital control from LCD display
Built-in CyberSync Transceiver
Compatible with CST2, CyberCommander and CyberSense remotes*; Global plug-and-play from 100 to 240 VAC
Available Modes: ACTION, COLOR, HSS (up to 1/8000 sec.), TTL; Action stopping flash durations as short as 1/18,600 sec. (t.1); Color consistency +/- 50K at any power; Bright, adjustable 800W Equivalent Daylight-Balanced LED Modeling Lamp; Rubber diffusion dome cover; Audible and visual recycle indicators; Built-in battery connection; Uses Paul C. Buff™ Standard Flashtube; *These transmitters do not allow for HSS and TTL capabilities.

ARRIVES WITH: Magnetic rubber diffusion dome; LINK shipping cover; Flashtube; 15' power cord; 60-Day Absolute Satisfaction Guarantee; 2-Year Factory Warranty; LINK Product Manual

Product Video

Product Specs

	LINK Flash Unit
Watt seconds	800 Ws
Action Mode - Power Variability	9 f-stops (full to 1/256 power)
Color Mode - Power Variability	9 f-stops (full to 1/256 power)
HSS Mode - Power Variability	9 f-stops (full to 1/256 power)
Recycle to Full	3.5 sec.
Flash Duration (t.5) - in Action Mode	1/1,400 sec. (at full power) \| 1/42,000 sec. (at minimum power)
Flash Duration (t.1) - in Action Mode	1/520 sec. (at full power) \| 1/17,300 sec. (at minimum power)
Flash Duration (t.5) - in Color Mode	1/1,400 sec. (at full power) \| 1/8,200 sec. (at minimum power)
Flash Duration (t.1) - in Color Mode	1/520 sec. (at full power) \| 1/5,500 sec. (at minimum power)
Power Requirements	Input Power: 95 - 265VAC, 50/60Hz
Average Current Draw	4.5 amps
Internal Receiver Range (from rear of unit)	Front: 175' \| Right: 290' \| Left: 325' \| Rear: 310'
Sync / Trigger Voltage	Less than 5 volts (safe for use with DSLR cameras)
Modeling Lamp	800 W Equivalent Daylight-Balanced
Modeling Lamp Usage	~60 mins. at full power on a fully charged battery
Modeling Lamp Fan Audibility (Full)	35dBA (650w equivalent)
LUX at 6' with bare bulb	320lx
LUX at 6' with diffusion dome	230lx
LUX at 6' with diffusion dome and 8.5HOR	600lx
LUX at 3' with bare bulb	1280lx
LUX at 3' with diffusion dome	920lx
LUX at 3' with diffusion dome and 8.5HOR	2400lx
Flashtube	14mm single-ring flashtube (daylight-balanced and UV-coated)
LCD Display	3.5" display
Stand Mount	Fits stands up to 5/8 in.
Umbrella Mount	Accepts umbrella rods up to 9mm
Weight	7 lbs. 8 oz.
Weight with Battery	8 lbs. 11 oz.
Dimensions	6.5 in. (height) x 4.875 in. (diameter) x 12.625 in. (length)

Dimensions Note: length measurements taken from the front of the shipping cover (in place on the unit’s faceplate) to the back panel; height measurements taken from the top of the flash unit to the bottom of the light stand top coupler, folded back underneath the unit; width measurements taken from side to side at the widest points