Pop up image

Go from hobby to profession with Paul C. Buff, Inc.

Learn More
**Paul C Buff will be closed on Labor Day, September 4th, 2017.
  • Customer Care 1-800-443-5542
  • M-F 9am - 5pm Central

CyberSync™ AC Powered Receiver

$69.95
SKU: CSR

Overview

The CyberSync™ AC Powered Receiver provides a simple and reliable wireless triggering system when utilized with the CyberSync™ Trigger Transmitter 2 (CST2), and is compatible with both the AlienBees™ and White Lightning™ flash units. The AC powered version uses a pass-through power cord to run in-line with the existing power cord that runs to your flash unit. There are no extra power cords needed and you never have to worry about changing batteries!

*For a lighting setup using multiple flashes, you will need at least one receiver. All Paul C. Buff flash units have a built-in light sensitive optical slave eye. When one receiver is connected to one flash, the others will “see” that flash begin to fire and fire in sync. Slave eyes are most reliable in controlled studio environments. If you will be working outdoors, or around other photographers, it is recommended that you have a receiver on each flash unit. This ensures that all flashes are firing via a radio frequency and you do not need to rely on the slave eye or any interference from others shooting in your vicinity.

Features
In-line AC-powered receiver (Batteries are never required)
Compatible with AlienBees™ and White Lightning™ flash units
Provides wireless firing of flash units when used with the CyberSync™ trigger transmitter (CST2)
NOT for use with the DigiBee or Einstein™ flash units
Arrives With
(1) ⅛” to ⅛” sync cord
(1) ⅛” to ¼” sync cord
(1 )⅛” to PC sync cord
CyberSync™ AC Powered Receiver Product Manual
60-Day Absolute Satisfaction Guarantee
2-Year Factory Warranty

Dimensions / Technical Specs

  CyberSync™ AC Powered Receiver
Dimensions 2.25 in. (width) x 4 in. (height) x 1 in.(depth) (plus 10 in. cord)
System Frequency Range 16 frequencies spaced 2MHz apart (from 2.427GHz to 2.457GHz)
System Encoding Secure 256-bit binary encoded packet, with validity verification
System Latency 1/4000 typical delay from closing of camera contact to receiver sync output signal
Sync Voltage Up to 300 Vdc from a connected flash unit