Pop up image

Go from hobby to profession with Paul C. Buff, Inc.

Learn More
**Paul C Buff will be closed on Labor Day, September 4th, 2017.
  • Customer Care 1-800-443-5542
  • M-F 9am - 5pm Central

CyberSync™ Transceiver



The CyberSync™ Transceiver is designed for use with DigiBee and Einstein™ flash units. The transceiver fits into the receptacle located on each flash unit. This forms an all-digital interface between the flash unit and the CyberSync™ Trigger Transmitter 2 (CST2), the discontinued CST, and/or the Cyber Commander™. The Transceiver is powered by the flash unit that it is connected to with the frequency and channel selection being made on the back panel of the flash unit.

All-digital Transceiver
Compatible with DigiBee and Einstein™ flash units ONLY
Can be used with the CyberSync™ Trigger Transmitter (CST2), or discontinued CST, for wireless firing
Full adjustment and wireless firing when used with the Cyber Commander™
NOT compatible with AlienBees™ or White Lightning™ flash units
Arrives With
(1) Transceiver
Rubber pin cover, attached
CyberSync™ Transceiver Quick Start Product Manual
60-Day Absolute Satisfaction Guarantee
2-Year Factory Warranty

Product Video

Dimensions / Technical Specs

  CyberSync™ Transceiver
Dimensions 1 in. (width) x 2.75 in. (height) x 0.375 in.(depth)
System Frequency Range 16 frequencies spaced 2MHz apart (from 2.427GHz to 2.457GHz)
System Encoding Secure 256-bit binary encoded packet, with validity verification
System Latency 1/4000 typical delay from closing of camera contact to receiver sync output signal
Sync Voltage Up to 300 Vdc from a connected flash unit