Pop up image

Go from hobby to profession with Paul C. Buff, Inc.

Learn More
**Paul C Buff will be closed on Labor Day, September 4th, 2017.
  • Customer Care 1-800-443-5542
  • M-F 9am - 4:30pm Central




The CyberSense can be used to control the output of both the flash and modeling lamp on up to four Paul C. Buff, Inc. flash units. Compatible with all previous / current CyberSync™ remotes. Listed as one of Professional Photographer Magazine's 'Hot Ones' for 2018.

Up to 300' of wireless working range (when on a flat and level terrain with no obstructions) via radio frequency (2.4 GHz band)
Can control up to 4 Paul C. Buff, Inc. flash units
16 frequencies to choose from
Adjusts both flash power and modeling lights in 1/10 f-stop increments
Compatible with the CyberSync™ Plus Model Receivers (CSR+ or CSRB+) when used with AlienBees™ or White Lighting™ flash units
Compatible with the CyberSync™ Transceiver (CSXCV) when used with DigiBees™ or Einstein™ flash units
CyberSync™ Trigger Transmitter 3 (CST3), or discontinued CST or CST2, are NOT REQUIRED but is HIGHLY SUGGESTED
*Note: The Sync Port on the CyberSense can be used to connect the CyberSense to your camera's PC-sync terminal if you do not have a CST2 or CST3.
Arrives With
(2) AAA batteries
CyberSense Product Manual
60-Day Absolute Satisfaction Guarantee
2-Year Factory Warranty

Product Video

Technical Specs

Dimensions 2.75 in. (width) x 5.5 in. (height) x 0.65 in.(depth)
LCD Screen Dimensions 2.25 in. (width) x 0.56 in. (height)
System Frequency Range 16 frequencies spaced 2MHz apart (from 2.427GHz to 2.457GHz)
System Encoding Secure 256-bit binary encoded packet, with validity verification
System Latency 1/4000 typical delay from closing of camera contact to receiver sync output signal
Battery Life 6.5 to 8.5 hours under normal use with premium alkaline batteries (uses two AAA alkaline or lithium batteries)
Sync Voltage Less than 4 Vdc